March 9, 2015


At we are always sourcing new and exclusive products for our customers.

Our stone panels are a totally new concept, blowing all previous limitations out of the water.


Most of the time a stone tile over the size of a 600×400 or 600×600 will need a thickness of greater than 1cm to keep it strong and stable until its been fitted. The problem with stones over 1cm thickness going onto plasterboard walls is the weight therefore requiring re-inforcement of the walls. Sometimes, for the real wow factor, slabs can be used which work out to be incredibly expensive in 2cm or 3cm.


Collaborating with one of Europes biggest stone exporters, have helped oversee the innovation of stone panels 2200 x 600 x 10mm that can be fitted straight onto plasterboard walls. These huge, over-sized tiles are also complimented by a range of 600×400 polished tiles, 600×100 strips for skirting and 30mm slabs to produce vanity tops. The 4 products are available in 7 different stones;

  • Istrian Shells
  • Pula Blue
  • Crema Castello
  • Charleston
  • San Marco
  • Pavillion
  • Basilica


But what do these panels look like? Well, we’ve just completed a job no less than a stones throw away from our showroom where I dropped in a few days ago to show you the look that can be achieved.

In this bathroom two stones have been used; Charleston Grey Polished Limestone on the floor… 600x400x10. Basilica Polished Limestone Panels on the wall, 2200x600x10 trimmed down slightly to fit the ceiling height of the room as it is a period property, sporting low ceilings in some of the rooms.






Share This Post
Show Houzz Reviews
Show Houzz Reviews